Built like it was in the 1970s.
Exactly as we present to you here the new Original Salzburger Grain Mill MT 5 with stainless steel thread, this mill was designed over 40 years ago. We’ll be back for it! The best materials and functional systems were chosen without compromise.
Experience has shown us: there is nothing better!
Mills that were built like this 20, 30, 40 years ago are still in full use today.
Every attempt to compromise in favour of the price calculation has turned out to be wrong.
With the Original Salzburger Grain Mill MT 5 with stainless steel thread without plastics* we are now back where we were in 1970: with the most beautiful and yet most robust mill (class 360 watts) from Salzburg.
Due to the high-quality thread made of stainless steel, in combination with the large grinding chamber made of solid oak wood, it is also possible to grind larger and harder grains. Today, more and more people, especially allergy sufferers, are demanding the most versatile application possibilities.
Only this high-quality and expensive adjustment system is the big and only difference to the
Salzburg Grain Mill MT 5
The MT 5 mill offered in the last 20 years is the right alternative for you if you only want to grind the rather softer types of grain that are conventional in Austria and Germany/Switzerland. These include wheat, rye, spelt, barley, oats etc.
Technical data of the grain mill MT 5 with stainless steel thread without plastics*.
Grinding capacity “fine”: 90 – 100g per minute
Grinding capacity “coarse”: a multiple
Height: 40 cm
Footprint Ø: 19 cm
Hopper capacity: approx. 800 g
Weight: 8,5 kg
Base height: 15.5 cm
Coarse-fine control: stepless
Mill-stone: Granite natural stone
Grinding stone diameter: 9 cm
Grinder bearing: elastic
Mill housing: domestic oak wood
Grinding chamber: domestic oak wood
Surface treatment housing: organic beeswax oil
Industrial motor: 360 Watt /230 Volt
Speed during grinding: 1200 rpm
Warranty for the mill: 12 years! In addition, if necessary, the stones are reground free of charge.
Warranty for the Mill stones: 24 years! The granite stones are replaced free of charge if the grinding performance is impaired due to breakage or chipping.
What types of grain can you grind with the MT 5 ED mill?
|CEREALS||MT 5 ED|
•••• very good
••• Good –
•• in small quantities up to approx. 250 g
• not recommended
X You are damaging the mill
1 Kamut is extremely hard.
A lot of heat is generated during the grinding process and thus condensate. Therefore, grind kamut only in small quantities (depending on the type of mill). Reach into the flour – if it is too hot, switch off the mill and ventilate the grinding chamber after grinding.
We ask you to point out the use of Kamut when ordering a mill.
There are many different types of corn. The common edible corn in Austria and Germany is not a problem for the marked mills. But especially in Italy, there are very old, especially old varieties that we know you can’t grind some of them. Unfortunately, we cannot test and list all types of maize.
In general, seeds containing oil cannot be ground, such as:
- Mustard seeds
- Sunflower seeds
- Pumpkin seeds
Due to the consistency, you can not grind:
- small woods
- dried small fruits and berries
- various cores
It is not recommended grinding coffee.
Colour and smell penetrate the grinding stone, cleaning is very difficult. If only coffee is to be ground, please contact us If only coffee is to be ground, please contact us