Our most powerful industrial mill with over 30 years of experience
This grain mill for the trade impresses with its high performance in continuous operation and as a specialist for the finest flour!
The capacity of 40 kg of grain alone shows which category this large, powerful mill belongs to. Nevertheless, the AM 3 is easy and safe to operate – with just one hand!
The fact that the thoroughly robust and high-quality construction of this mill more than pays for itself is proven by mills that have been in use at home and abroad for more than 30 years without any service or repair.
“Fully satisfied”, “more than satisfied”, “it doesn’t get any better than this” – this is what managers of bakeries, hotel kitchens, hospitals and other self-marketers tell us and praise above all the wonderfully fine flour that can be ground with this mill, even in large quantities. After this long period of experience, we more than appreciate the advantages of the mill and recommend it today primarily as:
THE PROFESSIONAL FOR THE FINEST FLOUR
for pasta, cakes and pastry. The convincingly good flour quality is achieved, among other things, by the low speed during milling (only 650 rpm) and the ingenious technology of the coarse/fine adjustment with volume feed regulation. Due to the volume feed regulation, the temperature during milling can be reduced, which is particularly advantageous in the case of increased grain moisture.
Solid outside and inside! – this is how the AM 3 mill is built.
The massive mill housing made of solid
Beech and maple wood is treated with beeswax on the outside. The use of solid wood has the advantage that after years small scratches, dents and other damages can be easily sanded out and the mill appears optically as “quasi new” again. Solid wood is antibacterial and has an antistatic effect. The advantage: almost dust-free grinding!
The funnel of the grinding chamber can be enlarged if necessary.
The strong three-phase motor with 2.8 Kw power consumption runs smoothly and quietly due to generously dimensioned ball bearings,
Overload protection by overcurrent circuit breaker. Due to the optimized interaction of the motor with the large grinding stone, we guarantee fast and gentle grinding.
|Grinding power fine:||approx.50-60 kg/hour|
|Grinding power coarse:||approx. 70 – 80 kg/hour|
|Hopper contents:||40 Kg (on request also larger)|
|Footprint:||550 x 550 mm|
|Flow inlet regulation:||reduces the temperature during grinding|
|Grinding Stone Diameter:||220 mm|
|Grinding chamber:||full, hard beech wood|
|Surface treatment housing:||biological
|Power consumption:||1,5 kW|
|Tension:||Power current 380 V, 50 Hz|
|Speed during grinding:||650 rpm|
|Warranty:||2 years on the mill|